Rockwell Automation AADvance Controller Configuration Guide User Manual
Page 165
![background image](/manuals/580880/165/background.png)
Document: 553633
ICSTT-RM405f-EN-P
Issue 07
7-3
Example: 'Pump on'.
Modbus: Modbus address of the variable, range 1 to 65,536.
SOE: Defines how Sequence of Events (SOE) is enabled for a boolean variable. SOE
can trigger on a falling edge or rising edge or both.
Write Access: Indicates that a variable can be written to an external client (True).
The default value is False.
Note: You must now set the Write Access parameter to TRUE if you need to write
to that attribute.
CIP: This indicates that a variable uses CIP or not. Double clicking on the cell opens a
dialog box with a CIP tab that is used to set the CIP attributes. It is set to either a
producer or a consumer. When it is blank for non CIP variables and a shaded cell
indicates that CIP is not available to that variable.