Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 260)

 

11-12 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Wire Digital Input Channel Data Variables
Digital input values are received from the corresponding output of the selected output
board in the sending system; the values are Boolean values. Both the specific input
channel and the corresponding output channel must be connected to the same variable
type.
1) Select the Data Variables tab.
2) Select a Channel row.
3) Select the W button to connect to a variable.
4) If you need to disconnect a variable select the U button.
The 128 input peer board supports 128 analogue inputs instead of 16 but is otherwise
identical.