Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 68)

 

4-28 Document: 553633
ICSTT-RM405f-EN-P
Issue 07
Configuration Guide (AADvance Controller)
Configure the Controller Modbus Slaves
You have to configure the communication parameters for each Modbus slave you
implement within the AADvance controller.
To configure a Modbus Slave do the following:
1) Select the Modbus Slaves tab.

The 9110 Modbus Slaves Editor dialog box opens.
2) In the Name column, locate the processor and slave you wish to configure.
3) Set the Connection field, click Apply.

The Id, Port and Protocol fields are set to their default values.
4) If you set the Connection to a serial port, the Id field represents the Slave ID; set
the Id field or accept the default value.