Rockwell Automation AADvance Controller Configuration Guide - Manual (Page 31)

 
Document: 553633
ICSTT-RM405f-EN-P
Issue 07
2-9
Set Up a Server for Hardware Floating Licenses
To set up a primary server for hardware floating licenses, do the following:
1) Insert the dongle supplied with the CD set into a USB or parallel port.
2) From the Start menu select AADvance  Licensing

The License Manager dialog box opens.
3) Select the Set Floating Licenses tab.
4) Set the IP Address of the primary server and a port number.
5) Select one of the two options to start the server Manual or Automatic
(Automatic is recommended).

The Primary Server Status will show Stopped.
6) Click Start Server button.

The Server Status will show Licensed.
7) Repeat this procedure to set up a secondary server, if you have two floating
license servers acting as a backup pair.