Peer-to-peer subnet controller configuration -3 – Rockwell Automation AADvance Controller Configuration Guide User Manual
Page 251
Advertising
![background image](/manuals/580880/251/background.png)
Document: 553633
ICSTT-RM405f-EN-P
Issue 07
11-3
The peer identity gives the position of the controller's IP address in the Peer
List.
Peer-to-Peer Subnet Controller Configuration
Configure the subnets as follows:
1) Right click on Network 4 (Peer 1) and select a subnet
A SN01 subnet is set up.
2) Select the SN01 subnet.
3) Select the DPXPNC40 tab.
Advertising