Westermo MR Series - Manual (Page 113)

113 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Confi gure > FTP Client 4.34
This page contains only one parameter.
Using the Web Page(s)
TX buffer size:
The size of the TX buffer in bytes.
Using Text Commands
From the command line, use the ftpcli command to configure FTP client options. To display current
settings enter the command:
ftpcli <instance> ?
where <instance> is 0. At present there is only one FTP client instance, i.e. 0, but the instance
parameter has been included to allow for future expansion.
To change the value of a parameter use the command in the format:
ftpcli 0 <parameter> <value>
The parameters and values are:
Parameter Values Equivalent Web Parameter
txbuff number TC buffer size
For example, to set the TX buffer to 8096 bytes you would enter the command:
ftpcli 0 txbuf 8096