Westermo MR Series - Manual (Page 122)

122 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
To:
This parameter is used to specify the email address field for auto-configuration request emails.
This should be set to the email address of the auto-configuration server.
From:
This parameter is used to specify email address of the unit for the auto-configuration request
emails.
Subject:
This field should contain a brief description of the email content for auto-configuration emails.
Using Text Commands
From the command line, the general settings are configured using the cmdcommand. To display cur-
rent general settings enter the command:
cmd <instance> ?
where <instance> is 0, 1, 2 or 3.
Note:
The instance number should be 0 in all cases EXCEPT when using the ASY name or Telnet
mode parameters, in which cases the instance number should match the required port number.
To change the value of a parameter use the command in the format:
cmd <instance> <parameter> <value>
The parameters and values are:
Parameter Values Equivalent Web Parameter
anonftp off, on Allow anonymous FTP login
asyled_mode 0,1 ASY LED mode: 0=Connection
1=DTR status
asyname text ASY <port> name
autocmd text Auto start macro
bufsafe_cnt number None - the level of available buff ers
read at least once during the period
set in bufsafe_secs. If this level is
not reached once then the “Low
System Buffers” event is logged
along with a new reason of “Healthy
threshold period” and the unit is
rebooted.
bufsafe_secs number None - The time period for buffer
level checking.
cmdnua number X.25 remote command address
comm_str text SNMP community string
cpuhigh_reboot off, on None - when ON, reboot will be
ini tiated if CPU usage is 95%> for
90 seconds.
ent_name text SNMP enterprise name
ent_nb number SNMP enterprise number
from text Auto-configure Email: From
ftpnatport number Additional FTP NAT port
gprsled_mode 0,1 GPRS LED mode: 0=GPRS 1=ISDN/
PSTN