Westermo MR Series - Manual (Page 31)

31 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
The Confi guration Pages 4.3
Click on the Configure closed folder icon. The folder will open to show its contents as illustrated
below:
You will see a list of web pages and sub-folders containing further web pages. Each page allows
you to configure parameters that are related to a particular function or protocol. For example, the
Ethernet page allows you to set up the unit’s IP address, DNS server address etc.
A page will contain a mixture of text-boxes, check boxes and/or list-boxes. To configure a particular
item simply select the appropriate value from a list, type in into a text-box the appropriate value
from a series of checkboxes.
When you have finished making changes on a particular page, click on the OK button to accept the
changes or CANCEL to revert to the existing values.
Note:
Pressing OK will save the changes you have made for the current session only i.e. they will be
lost if the unit when the power is removed. If you wish to save the changes more permanent,
make sure that you save them to non-volatile memory as described in Saving Configuration
Changes.
The following sections describe each of the configuration pages in detail. They first explain each of
the parameters or options shown on the web page. This is followed by a description of the equiva-
lent text commands.