Westermo MR Series - Manual (Page 28)

28 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Confi guring your unit 4
This section describes the various configuration parameters for the unit and how to set or change
them using the built-in web pages or the text commands. Configuration using the Web pages is
achieved by entering the required values into text boxes or tables on the page, or by turning fea-
tures on or off using checkboxes. The same results can be achieved entering the appropriate text
commands via one of the serial ports.
Note:
The WEB pages are arranged in two tiers. The initial WEB page displayed, is the basis setup
page were many of the most often used features have been grouped together. For more
advanced configuration option the “Full Menu” option can be selected. This will give the user
access to all the advanced features detailed in section 4.4 onwards.
Logging In 4.1
To configure the unit via the Web interface, either establish a DUN connection to it and then open
your web browser and enter 1.2.3.4 for the web address, or enter the unit’s Ethernet IP address
(192.168.0.99) into your web browser after configuring your PC to have an address on the same
sub net. You will be presented with a login page similar to the following: