Westermo MR Series - Manual (Page 302)

302 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Confi gure > X25 > Macros 4.106
This page allows you to define up to 64 X.25 CALL “macros” that can be used to initiate ISDN
and/or X.25 layer 3 calls. These simple English-like names are mapped to full command strings. For
example, the call string:
0800123456=789012Dtest data
could be given the name “X25test” and then executed simply by entering:
CALL X25test
Using the Web Page(s)
To create a macro, enter a name for the macro in the left column of the Configure > X25 >
Macros table and in the right column enter the appropriate command string (excluding the ATD
which is inserted automatically).
Using Text Commands
From the command line the macro command may be used to define CALL macros. To set up a new
macro, two commands are required in the form:
macro <instance> name <name>
macro <instance> cmd <cmd>
The first command assigns the name <name> to macro instance <instance>where <instance>is 0 -
63. The second assigns the command string <cmd> to macro instance <instance>.
For example:
macro 5 name X25test
macro 5 cmd 0800123456=789012Dtest data
To display the current values for a particular macro use the macrocommand in the following format:
macro <instance> ?
where <instance> is 0 - 63