Westermo MR Series - Manual (Page 336)

336 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Physical Port 0 5.13.4
Statistic Description
Port 0 Rx Frames Received High-Level Data Link Control frames
Port 0 Rx Bytes Successfully received data bytes
Port 0 Rx Runts Received frames shorter than minimum frame length
Port 0 Rx Giants Received frames exceeding maximum frame length
Port 0 Rx Crc Errors Received Cyclic Redundancy Check errors
Port 0 Rx Overruns Receive First In First Out overflows
Port 0 Rx Aborts Received abort sequences detected
Port 0 Buffer Shortages Packets discarded due to lack of system buffer space
Port 0 Message Shortages Packets discarded due to lack of system message buffers
Port 0 Tx Frames Transmitted High-Level Data Link Control frames
Port 0 Tx Bytes Successfully transmitted data bytes
Port 0 Tx Underruns Transmit First In First Out underruns
Using Text Commands
To display the current statistics for a physical port enter the command:
at\mibs=syn.<instance>.stats
where <instance> is 0.
To clear the current statistics for a physical port enter the command: at\mibclr=syn.0.stats
Statistics > TPAD > TPAD n 5.14
Note:
Which sets of statistics are displayed for each TPAD instance is dependant upon the Layer 2
inter face parameter defined on the Configure > TPAD > TPAD n pages.
TPAD Stats 5.14.1
Statistic Description
NB host responses Responses received from host after sending a transaction request
NB no host responses No. of times response not received from host after sending a transaction
request
Max host response time Maximum time taken for Westermo receive a response from host after
sending a transaction request
Min host response time Minimum time taken for Westermo receive a response from host after
sending a transaction request
Avg host response time Average time taken for Westermo receive a response from host after
sending a transaction request
NB L3 connections Successful Layer 3 connections
NB L3 failures Failed Layer 3 connections
Max L3 time Maximum time taken for a Layer 3 connection to be established (excludes
time taken for lower layers to connect)
Min L3 time Minimum time taken for a Layer 3 connection to be established (excludes
time taken for lower layers to connect)
Avg L3 response time Average time taken for a Layer 3 connection to be established (excludes
time taken for lower layers to connect)