Westermo MR Series - Manual (Page 224)

224 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Secondary authorisation server password:
This password is supplied by the Secondary authorisation NAS administrator and is used in con-
junction with the Secondary authorisation NAS ID to authenticate RADIUS packets.
Confirm secondary authorisation server password:
This parameter is used to confirm the password value entered above.
Primary accounting NAS ID:
This is an identifier which is passed to the primary accounting NAS and is used to identify the
RADIUS client. The appropriate value will be supplied by the Primary accounting NAS adminis-
trator.
Primary accounting server IP address:
This is the IP address of the primary accounting NAS.
Primary accounting server password:
This password is supplied by the Primary accounting NAS administrator and is used in conjunc-
tion with the Primary accounting NAS ID to authenticate RADIUS packets.
Confirm primary accounting server password:
This parameter is used to confirm the password value entered above.
Secondary accounting NAS ID:
This is an identifier which is passed to the Secondary accounting NAS and is used to identify
the RADIUS client. The appropriate value will be supplied by the Secondary accounting NAS
administrator.
Secondary accounting server IP address:
This password is supplied by the Secondary accounting NAS administrator and is used in
conjunc tion with the Secondary accounting NAS ID to authenticate RADIUS packets.
Secondary accounting server password:
This password is supplied by the Secondary accounting NAS administrator and is used in
conjunc tion with the Secondary accounting NAS ID to authenticate RADIUS packets.
Confirm secondary accounting server password:
This parameter is used to confirm the password value entered above.
Allow local authorisations:
Set this parameter to Yes to allow local authorisation if the RADIUS servers are unreachable or
not configured. Select No to disable local authorisation.
The following parameters apply when communicating with any of the configured RADIUS servers:
Maximum re-transmits:
This parameter specifies the maximum number of times RADIUS data should be transmitted to
the NAS before the negotiation is deemed to have failed.
Re-transmit interval (s):
This parameters specifies the interval between re-transmits in seconds.
Inactivity timeout (s):
If the negotiation procedure remains inactive for the length of time (in seconds) specified by this
parameter it is deemed to have failed.