Westermo MR Series - Manual (Page 296)

296 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
Additional Confi guration for wireless 4.102.1
If you are intending to use your wireless WAN router to connect a local PC or laptop to remote
services via wireless, you will need to ensure that both the PC and the router share a common
TCP/IP subnet.
To ensure that this is the case, use the unit’s DHCP server to give your PC an IP address in the
correct range. To do this, navigate to Basic IP Address > DHCP, the following page will be dis-
played:
Fill in the six sections appropriately, then click OK, not forgetting to save the configuration later. In
the above example, the unit has an IP address (set in Basic IP Address > Static IP) of 192.168.0.99
and the first PC to connect to it will be given an address of
192.168.0.1 enabling communication on the same subnet.
If you have correctly configured the unit, you should now be able to connect the LAN port to a PC
or laptop (using an Ethernet hub or a crossover cable), for the purpose of accessing host services
such as Internet pages or email.
Four a more comprehensive list of the DHCP server function go to FULL MENU > Configure >
DHCP Servers > Ethernet Port x