Westermo MR Series - Manual (Page 335)

335 6622-3201
Web Interface and Command Line Reference Guide www.westermo.com
ISDN B1 Channel 5.13.2
Statistic Description
B1 Rx Frames Received B1 channel High-Level Data Link Control frames
B1 Rx Bytes Successfully received B1 channel data bytes
B1 Rx Runts Received B1 channel frames shorter than minimum frame length
B1 Rx Giants Received B1 channel frames exceeding maximum frame length
B1 Rx Crc Errors Received B1 channel Cyclic Redundancy Check errors
B1 Rx Overruns Receive B1 channel First In First Out overflows
B1 Rx Aborts Received B1 channel abort sequences detected
B1 Buffer Shortages B1 channel frames discarded due to lack of system buffer space
B1 Message Shortages B1 channel frames discarded due to lack of system message buffers
B1 Tx Frames Transmitted B1 channel High-Level Data Link Control frames
B1 Tx Bytes Successfully transmitted B1 channel data bytes
B1 Tx Underruns Transmit B1 channel First In First Out underruns
Using Text Commands
To display the current statistics for the ISDN B1 Channel enter the command:
at\mibs=syn.b1
To clear the current statistics for the ISDN B1 Channel enter the command:
at\mibclr=syn.b1
ISDN B2 Channel 5.13.3
Statistic Description
B2 Rx Frames Received B2 channel High-Level Data Link Control frames
B2 Rx Bytes Successfully received B2 channel data bytes
B2 Rx Runts Received B2 channel frames shorter than minimum frame length
B2 Rx Giants Received B2 channel frames exceeding maximum frame length
B2 Rx Crc Errors Received B2 channel Cyclic Redundancy Check errors
B2 Rx Overruns Receive B2 channel First In First Out overflows
B2 Rx Aborts Received B2 channel abort sequences detected
B2 Buffer Shortages B2 channel frames discarded due to lack of system buffer space
B2 Message Shortages B2 channel frames discarded due to lack of system message buffers
B2 Tx Frames Transmitted B2 channel High-Level Data Link Control frames
B2 Tx Bytes Successfully transmitted B2 channel data bytes
B2 Tx Underruns Transmit B2 channel First In First Out underruns
Using Text Commands
To display the current statistics for the ISDN B2 Channel enter the command:
at\mibs=syn.b2
To clear the current statistics for the ISDN B2 Channel enter the command:
at\mibclr=syn.b2