5 geometry commands – HEIDENHAIN CNC Pilot 4290 User Manual
Page 117
HEIDENHAIN CNC PILOT 4290
105
Full circle on lateral surface G314-Geo
Parameters
Z:
Circle center
C:
Circle center (angle)
CY:
Angle as linear value (referenced to unrolled reference diameter)
R:
Radius
P:
Pocket depth – no entry: ”P” from G308
Rectangle on lateral surface G315-Geo
Parameters
Z:
Center
C:
Center (angle)
CY:
Angle as linear value (referenced to unrolled reference diameter)
A:
Angle to longitudinal axis (reference: Z axis) – default: 0°
K:
Length
B:
Width
R:
Chamfer/rounding - default: 0
■
R>0: Radius of rounding
■
R<0: Width of chamfer
P:
Pocket depth – no entry: ”P” from G308
Eccentric polygon on lateral surface G317-Geo
Parameters
Z:
Center
C:
Center (angle)
CY:
Angle as linear value (referenced to unrolled reference diameter)
Q:
Number of edges (Q>2)
A:
Angle to a polygon side (reference: Z axis) – default: 0°
K:
Edge length
■
K>0: Edge length
■
K<0: Key width (inside diameter)
R:
Chamfer/rounding - default: 0
■
R>0: Radius of rounding
■
R<0: Width of chamfer
P:
Pocket depth – no entry: ”P” from G308
4.5 Geometry Commands