HEIDENHAIN CNC Pilot 4290 - Manual (Page 119)

HEIDENHAIN CNC PILOT 4290 107
V: Direction (orientation) – default: 0
■ V=0 – without W: distribution over complete circle
■ V=0 – with W: distribution over long arc
■ V=0 – with Wi: algebraic sign of Wi defines the direction
(Wi<0: clockwise)
■ V=1 – with W: clockwise
■ V=1 – with Wi: clockwise (sign of Wi has no meaning)
■ V=2 – with W: counterclockwise
■ V=2 – with Wi: counterclockwise (sign of Wi has no meaning)
Z: Center of pattern
C: Center of pattern (angle)
H: Position of figures – default: 0
■ H=0: Normal position – figure is rotated about the circle
center (rotation).
■ H=1: Original position – position of figure remains unchanged
with respect to the coordinate system (translation). 4.5 Geometry Commands