HEIDENHAIN CNC Pilot 4290 - Manual (Page 419)

HEIDENHAIN CNC PILOT 4290 407
Selecting the list
You can open the list ”Maintenance and Repair
Tasks” according to the following criteria:
List of all maintenance tasks
List of the ”pending, current and
overdue maintenance tasks”
Switch the soft-key row to ”Type/
Status of Tasks”
Type of tasks:
List of repair tasks
List of maintenance tasks
List of inspection tasks
List of cleaning tasks
Status of the tasks:
List of the ”current and overdue
maintenance tasks”
List of the ”pending maintenance
tasks”
Acknowledged measures
Lists the acknowledged maintenance
measures
List of acknowledged measures:
■ Type:
■ Symbol: See ”Type of maintenance actions” table
■ ”+”: Measure was acknowledged
■ Measure: Designation of the maintenance action
■ Acknowledged – through: Name of the
acknowledger
Acknowledgment – on: Date of the
acknowledgment
■ At: Time of ”maintenance action is due” (t2)
■ Comment of the acknowledger
Time data (German / English)
M / M: Minutes
S / H: Hours
T / D: Days
W / W: Weeks
J / Y: Years
Parts of a time unit are given as decimal numbers. Example: 1.5 S = 1
hour and 30 minutes.
9.3 Maintenance System