HEIDENHAIN CNC Pilot 4290 - Manual (Page 85)

HEIDENHAIN CNC PILOT 4290 73
DIN PLUS main menu
Prog (NC program management)
Head: Edit the NC program head (program head, turret
assignment, chucking equipment table)
Geo: Program the contour of the blank and finished part
(submenu ”Geometry”)
Pro(gramming): Program the machining of the workpiece
(”Machining” submenu)
PAb: Insert program section codes
Block: Switch to the block submenu containing functions
for moving, copying or deleting NC blocks
NC Bl: Functions for block numbering, searching and ”free”
editing
Configuration of the DIN PLUS screen display (with/
without graphical display)
Graphics: Select graphic simulation window, switch the
contour simulation ON/OFF
4
.3
The DIN PLUS Edit
or
”Geometry” pull-down menu (contour
programming):
■ Blank – Chuck piece/bar G20: creates an NC
block in the BLANK section, switches to the
”Geometry” menu and activates the ”Chuck part
cylinder/tube G20” dialog box.
■ Blank – Casting G21: creates an NC block in the
BLANK section, switches to the ”Geometry” menu
and activates the ”Casting G21” dialog box.
■ Blank – Free contour: positions the cursor in the
BLANK section and switches to the Geometry
menu.
■ Finished part: positions the cursor in the
FINISHED PART section and switches to the
Geometry menu.
Single menu items
■ Programming: switches to the Machining submenu
and positions the cursor in the MACHINING
section.
■ PAb (Program Section codes) – inserts new section
codes:
Select the desired section code and press
ENTER.
The CNC PILOT inserts the section code at the
correct position.
■ Block: switches to the block-editing functions (see
section ”
4.5.5 Block menu”).
”NC Bl” pull-down menu
■ Program beginning Positions the cursor to the
beginning of the program
■ Program end: Positions the cursor to the program
end
■ Search function - Search block
Enter the block number.
The CNC PILOT positions the cursor on the block
number provided that it exists.
■ Search function - Search word
Enter the NC word to be searched for ( G
command, address parameter, etc.).
The cursor skips to the first NC block containing
the word searched for. The CNC PILOT searches
from the cursor position to the end of the program,
then continues searching from the start of the
program.
■ Increment Numerical interval between NC blocks
The increment entered remains in effect for the
active NC program only.
Continued