HEIDENHAIN CNC Pilot 4290 - Manual (Page 57)

HEIDENHAIN CNC PILOT 4290 45
3.5 A
u
tomatic Mode of Oper
ation
3.5.5 Tool Life Management
Select ”Comp - Tool life management.”
This tool list with the current tool life data is
displayed
Select the tool
ENTER opens the ”Tool life management” dialog
box
■ Set to ”ready for use” - or
■ update the tool life data with a ”new cutter.”
■ Additive compensation
Select ”Comp - Additive cormpensation.”
Enter the compensation number (901 to 916); the
CNC PILOT displays the current compensation
values.
Enter the compensation values
Values entered here are added to the existing
compensation values.
Additive compensation:
■ are activated with G149 ..
■ are managed in setup parameter 10
■ can be changed by no more than 1 mm