HEIDENHAIN CNC Pilot 4290 - Manual (Page 331)

HEIDENHAIN CNC PILOT 4290 319
Main machining Submachining Location Execution
Finish-milling – continued
Surface, contour,
slot, pocket (*) Location Execution of the selected milling operation on the
selected machining location
*: Define the milling operation
Parting (Cutting-off) – – The workpiece is cut off.
Full-Surface Machining – The workpiece is cut off and transferred to the
counterspindle.
Rechucking Full-Surface Machining – ■ Lathe with counterspindle: The workpiece is transferred
to the counterspindle.
■ Lathe fitted with one spindle: The workpiece is
rechucked manually.
Machining of fits For contour machining (finishing), the AWG takes into account contour elements with the
”measuring” contour element.
Special machining tasks No significance for the AWG
6.13 A
u
tomatic W
o
rking Plan Gener
ation (A
WG)