HEIDENHAIN CNC Pilot 4290 - Manual (Page 411)

HEIDENHAIN CNC PILOT 4290 399
8.3 T
e
c
hnolog
y D
atabase (Cut
ting
V
alues)
8.3 Technology Database
(CuttingValues)
The CNC PILOT stores the technology data according
to the
■ Material
■ Cutting material
■ Machining mode
The machining modes supported by the CNC PILOT
are permanently defined and cannot be changed;
materials and cutting materials can be defined in a
fixed-word list.
The cutting data are managed in the technology
editor.
Selection: ”Tech(nology data)” menu item
(parameter mode)
The TURN PLUS working plan generation uses the
technology data. In addition, you can use the
database for saving your ”own” cutting data.
Cutting-value tables
■ Tab(le) material
Define the machining mode and the cutting material
– the CNC PILOT lists the cutting data according to
materials.
■ Tab(le) cut. material
Define the material and the machining mode – the
CNC PILOT lists the cutting data according to
cutting materials.
■ Tab(le) proc.(ess) type
Define the material and the cutting material – the
CNC PILOT lists the cutting data according to
machining modes.
To enter material, cutting material and
machining mode, always use the fixed-
word list.