HEIDENHAIN CNC Pilot 4290 - Manual (Page 363)

HEIDENHAIN CNC PILOT 4290 351
Control parameters (continued)
40 – Allocation to interfaces
The interface parameters are saved in the
parameters 41 to 47. In parameter 40 the machine tool
builder assigns an interface description to an encoder.
The Transfer mode of operation uses the parameters
of the interface defined under ”external input/output.”
Meaning of data to be entered:
■ÿ 1..7: Interfaces 1..7, for example, ”2 = interface 2”
described in control parameter 42.
■ÿ External input/output
■ÿ DataPilot 90
■ÿ Printer
■ÿ Post-process measuring
■ 2nd keyboard (or card reader)
The parameter settings are made by the machine-tool builder.
41..47 – Interfaces
The CNC PILOT stores the ”settings” of the serial
interfaces and the printer interface in these
parameters.
You define the parameter settings in the Transfer mode of
operation.
48 – Transfer directory
■ÿ NETWORK directory
Path of directory offered and indicated for data transfer with
NETWORK.
You define the parameter settings in the Transfer mode of
operation.
196 – SIK number
The CNC PILOT checks whether certain options are
available on your system. For configuring additional
options, your machine manufacturer must be
informed of your board number.
7.3 Contr
ol P
a
ra
met
ers