4 contours of workpiece blanks, 4 w o rkpiece blank cont ours – HEIDENHAIN CNC Pilot 4290 User Manual
Page 240
6 TURN PLUS
228
Forging blank (or cast blank)
Generates the workpiece blank from an existing finished part.
Parameters
Surface:
■
Cast blank
■
Forging blank
With bore hole:
■
Yes
■
No
K:
Equidistant oversize for the complete part
I:
Single allowance (for individual elements or contour sections)
6.4
Contours of Workpiece Blanks
Bar
defines the contour of a cylinder (chuck or bar).
Parameters
X:
■
Diameter
■
Diameter of circumference of polygonal blank
Z:
Blank length, including face oversize
K:
Face oversize (distance between workpiece zero point and
right edge)
6.4 W
o
rkpiece Blank Cont
ours
Tube
defines the contour of a hollow cylinder (tube).
Parameters
X:
■
Diameter
■
Diameter of circumference of polygonal blank
I:
Inside diameter
Z:
Blank length, including face oversize
K:
Face oversize (distance between workpiece zero point and
right edge)
First enter the ”single oversize” and then
select the contour element/the contour
range.