HEIDENHAIN CNC Pilot 4290 - Manual (Page 88)

4 DIN PLUS 76
Machining submenu
G: Enter number of G function/call the list of G functions
G menu: Pull-down menus containing G functions appear
M: Enter the M number
M Menu: Opens pull-down menus containing M functions
T:Tool call
F: Call ”G95 - ”Feed per revolution”
S: Calls ”G96 – Cutting speed”
Instructions for structuring the program
Graphics: Activate/update the contour in the graphic
simulation windows
4.3.3 Machining Menu
The ”Machining” submenu contains G and M
functions as well as further functions for the
MACHINING section.
Selecting a G function:
■ The G number is known: Select ”G” and enter the
number.
■ The G number is not known:
Select ”G.”
Press the CONTINUE soft key
Select the G function from the list of G numbers
■ ”G menu”: To select the desired G function, use the
pull-down menu.
Selecting an M function:
■ The M number is known: Select ”M” and enter the
number.
■ M menu: To select the M function, use the menu.
Single menu items
■ T – Tool call
Program the T number (see ”
4.6.7 Tools, Types of
Compensation”). A list containing the tools
indicated in the TURRET section is displayed.
■ F- calls ”G95 - ”Feed per revolution.”
■ S- calls ”G96 – Cutting speed.”
”Instr(uctions)” pull-down menu:
■ DIN PLUS words – calls selection list containing:
■ Instructions for structuring the program.
■ Instructions for input/output. n
■ Variables – Enter a variable or mathematical
expression
■ / Skip level
Enter skip level 1 to 9.
The CNC PILOT inserts the skip level before the
NC block (example: /3 N 100 G...).
■ $ Slide:
Enter the ”Slide number”; more than one slide
number -one after the other- can be entered.
The DIN editor inserts the slide number before the
NC block (example: $1$2 N 100 G...).
Continued
4
.3
The DIN PLUS Edit
or