HEIDENHAIN CNC Pilot 4290 - Manual (Page 7)

Contents
HEIDENHAIN CNC PILOT 4290
III
3.5 Automatic Mode of Operation..... 41
3.5.1 Program Selection..... 41
3.5.2 Defining a Start Block..... 42
3.5.3 Program Sequence Modification..... 43
3.5.4 Compensation..... 44
3.5.5 Tool Life Management..... 45
3.5.6 Inspection Mode..... 46
3.5.7 Block Display..... 48
3.5.8 Graphic Display..... 49
3.5.9 Post-Process Measuring Status Display..... 51
3.6 Machine Display..... 52
3.7 Load Monitoring..... 54
3.7.1 Reference Machining..... 54
3.7.2 Production Using Load Monitoring..... 55
3.7.3 Editing Limit Values..... 56
3.7.4 Analyzing Reference Machining..... 57
3.7.5 Machining Using Load Monitoring..... 57
3.7.6 Load Monitoring Parameters..... 58
4 DIN PLUS..... 59
4.1 DIN Programming..... 60
4.1.1 Introduction..... 60
4.1.2 DIN PLUS Screen..... 61
4.1.3 Linear and Rotary Axes..... 62
4.1.4 Units of Measurement..... 63
4.1.5 Elements of the DIN Program..... 63
4.2 Programming Notes..... 65
4.2.1 Parallel Editing..... 65
4.2.2 Address Parameters..... 65
4.2.3 Contour Programming..... 66
4.2.4 Tool Programming..... 68
4.2.5 Fixed cycles..... 69
4.2.6 NC Subprograms..... 70
4.2.7 Template Control..... 70
4.2.8 NC Program Interpretation..... 70
4.3 The DIN PLUS Editor..... 71
4.3.1 Main Menu..... 72
4.3.2 Geometry Menu..... 75
4.3.3 Machining Menu..... 76
4.3.4 Block Menu..... 77