HEIDENHAIN CNC Pilot 4290 - Manual (Page 429)

HEIDENHAIN CNC PILOT 4290 417
1
0.3 D
ata
Tr
ansf
er
10.3 Data Transfer
10.3.1 Enabling, DataTypes
Enabling – CNC PILOT
See ”Enabled directories”
You can protect these directories from access for
reading and/or writing by assigning passwords
(menu item ”Controls – Network – Enabling
password” in the Service/Diagnosis operating mode –
see ”
9.3 Diagnosis”)
If you enter no password, all communication partners
have access to the directories.
Enabling – communication partners
The communication partner can assign passwords for
reading or writing access (Windows: ”System control
– Networks – Access control to shared levels”). In
this case, the Windows dialog box ”Enter network
password” appears when you try to access
directories of the remote system.
If only one password is used, it can be saved. As a
result, the dialog box appears only once (and each
time the password has been changed). The password
saved is checked each time you try to access further
directories. If the password for read permission
differs from the one for write permission, the ”Enter
network password” dialog box appears each time you
try to access a directory after having restarted the
CNC PILOT.
File types
Select the desired file type in the dialog box ”Mask of
files”:
■ All NC programs (DIN PLUS programs)
■ NC main programs (DIN PLUS programs)
■ NC subprograms (DIN PLUS programs)
■ Template files (DIN PLUS templates)
■ TURN PLUS complete (workpiece blank and
finished part description and work plan)
■ TURN PLUS workpieces (workpiece blank,
finished part description)
■ TURN PLUS workpiece blanks (blank description)
■ TURN PLUS finished parts (finished part
description)
■ TURN PLUS contour trains (description of contour
trains)
■ TURN PLUS Turr.(et) lists
■ TURN PLUS Mach.(ining) seq.(uence)
■ Parameter files (PARA_USR directory)
■ Parameter backup (BACKUP directory)
■ Program head lists (subfiles for program head
entries)
Danger of collision!
Other computer systems in the network may overwrite
CNC PILOT programs. When organizing the network and
granting access rights, ensure that only authorized
persons have access to the CNC PILOT.
Shared directories in CNC PILOT
...\NCPS: NC main programs and subprograms, template files
...\GTR: Workpiece blank descriptions (TURN PLUS)
...\GTF: Finished part descriptions (TURN PLUS)
...\GTW: Workpiece descriptions (TURN PLUS)
...\GTC: Complete programs (TURN PLUS)
...\GTT: Contour train descriptions (TURN PLUS)
...\GTL: Turret lists (TURN PLUS)
...\GTB: Machining sequences (TURN PLUS)
...\PARA_USR:
■ Subfiles for program head entries
■ Converted parameter and operating resource files
■ (Saved) error log file
...\DATA: Files for the service personnel
...\BACKUP: Files for data backup (backup/restore)