HEIDENHAIN CNC Pilot 4290 - Manual (Page 405)

HEIDENHAIN CNC PILOT 4290 393
Collet chuck (type 110) Example: Three-jaw chuck (type 130)
Code for jaw adapter
When specific combinations of chuck and jaws are required,
enter the appropriate jaw adapter code. For both the chuck
and the required chuck jaws, enter the same code.
”Jaw connection = 0”: any jaw type may be used.
8.2 Chuc
king Equipment D
atabase
Chuck
Parameters, chuck (type 1x0)
ID: Chuck identification number
Available: Physical availability (fixed-word list)
Jaw con.: Code for jaw adapter
d: Chuck diameter
l: Chuck length
max.cl.dia. (d1): Maximum clamping diameter
min.cl.dia. (d2): Minimum clamping diameter
dz: Centering diameter
max.speed: Maximum spindle speed [rpm]