HEIDENHAIN CNC Pilot 4290 - Manual (Page 89)

HEIDENHAIN CNC PILOT 4290 77
4
.3
The DIN PLUS Edit
or
■ L call external – (see ” 4.16 Subprograms”).
Select the subprogram and press RETURN
Enter the transfer parameters.
The CNC PILOT inserts the subprogram call.
■ L call internal – (see ” 4.16 Subprograms”).
Enter the name of the subprogram (number of the
first block of the subprogram).
Enter the transfer parameters.
The CNC PILOT inserts the subprogram call.
■ Comment line
Enter the comment – the comment is inserted
above the cursor position.
■ Template selection – Select from the available
templates. Prerequisite:The machine manufacturer
has defined templates
■ The working plan – ”collects” all comments that
begin with ”// ...” and places them before the
MACHINING section. This gives you a summary of
the functions in the NC program or subprogram.
Menu item:
■ Graphic – Activates/deactivates contours in the
graphic window.
4.3.4 Block Menu
This function enables NC program sections (several
successive NC blocks) to be moved, copied, deleted
or exchanged between NC programs.
To define an NC block, highlight the first and last line
of the block. Then select the desired function from the
”Edit” menu.
In order to exchange blocks between NC
programs, copy the block to the clipboard. Then read
in the block from the clipboard. A block remains in the
clipboard until it is overwritten by another block.
Single menu items
■ Start Mark:
Position the cursor on the beginning of a block.
Press ”Start mark.”
■ End mark:
Position the cursor on the end of a block.
Press ”End mark.”
Continued