HEIDENHAIN CNC Pilot 4290 - Manual (Page 92)

4 DIN PLUS 80
4.4.2 TURRET
TURRET x (x: 1..6) defines the turret assignment of
tool carrier x. You enter the ID number directly
(”Tools” dialog box), or you take it from the tool
database. You can access the tool database with the
”Type list” or ”ID list” soft key.
Alternately, you can define the tool parameters in the
NC program.
Enter the tool data:
„Select ”Head – Turret assignment.”
Position the cursor in the TURRET section.
Press the INS key.
Edit the ”Tool” dialog box.
Edit the tool data:
Position the cursor.
Press RETURN or double-click with the left mouse
key
Edit the ”Tool” dialog box.
Parameters of the ”Tool” dialog box:
■ T-number: Position on the tool carrier.
■ ID (ID number): Reference to the database – no
input: Data saved in the database as ”temporary
tools.”.
4.4 Pr
ogr
am Section Codes
Continued
Access to the tool database by soft key
Edit the tool parameters
Entries in the tool database - sorted by tool type
Entries in the tool database - sorted by tool ID number
Definition of the variable display
Call: ”Variable display” button in the ”Editing program
head” dialog box
In the dialog box you define up to 16 V variables that
control the program process. In automatic mode and
in the simulation you define whether the variables are
to be asked for during program run. As an alternative,
the program version is run with the default values.
For each variable you define:
■ Variable number
■ Default value (initialization value)
■ Description (text, with which this variable is
asked for during program run)
The definition of the variable display is an alternative
to programming with INPUTA/PRINTA commands.