HEIDENHAIN CNC Pilot 4290 - Manual (Page 394)

8 Operating Resources 382
Parameters in dialog box 2 G S TP
TH DIN: Type of tool holder – • –
TH heig (wh): Height of tool holder – • –
TH brea. (wb): Width of tool holder – • –
Chck.. (fd): Diameter of chuck – *1 –
Chck.he. (fh): Height of chuck – *1 –
Sali.lg.(ax): Overhang length – • –
Pitch (hf): Thread pitch • – –
Threads per unit length (gb) for multiple threads – – –
Tooth pattern of cutter – see fixed word list – – •
Available.: Physical availability • – •
Pict. no. (tool display) – • –
Cut.mat. Cutting material – – •
CSP comp.: Compensation factor for cutting speed – – •
FDR comp.: Compensation factor for feed rate – – •
Deep comp.: Compensation factor for cutting depth – – •
Location type • – •
Fixed-word list for tooth pattern:
■ 0: Undefined
■ 1: SpurFac (straight, end)
■ 2: HeliFac (helical, end)
■ 3: SpurCir (straight, circumference)
■ 4: HeliCir (helical, circumference)
■ 5: SEndCir (straight, end and circumference)
■ 6: HEndCir (helical, end and circumference)
■ 7: Special tooth pattern
*1: Where fd=0/fh=0 no chuck is depicted.
G: Basic data
S: Tool depiction (simulation)
TP: TURN PLUS
See also:
■ ” 8.1.4 Multiple Tools, Tool Life Monitoring” (parameters of the third
dialog box)
■ ” 8.1.5 Notes on Tool Data”
■ ” 8.1.6 Tool Holder, Mounting Position”
Example: Tool type 611
8.1 T
ool
D
atabase