HEIDENHAIN CNC Pilot 4290 - Manual (Page 296)

6 TURN PLUS 284
Adjust the coolant circuits in the ”tool” dialog box.
6.1
1 Pr
epar
e
6.11.2 Setting Up a Tool List
With ”Prepare – Tool list – ...” you manage custom
turret assignments (see also ”Machining Parame-
ters 2 Global Technology Parameters”).
■ View turret – look at turret n: Shows the turret
assignment.
■ Set up turret – set up turret n: Select tools and
position them on the turret
■ Load list – saved tool list: Load a saved tool list
(”Load file” selection box)
■ Load list – tool list of the machine: Accept the
current revolver assignment of the machine (see
”
3.3.1 Setting Up a Tool List”).
■ Save list: Save the current turret assignment in a
file
■ Delete list: TURN PLUS deletes the selected file
Load TURN PLUS-specific turret
assignments before using the IWG/AWG
function for selecting tools.
Tools from the database
Select ”Setting up - Tool list - Set up turret – Set up
turret n”
<
Select the tool pocket (arrow up/down or touch pad)
Enter the tool type – the CNC PILOT
displays all tools of this type mask
Enter the ID number – the CNC PILOT
displays all the tools of this ID mask
<
Select the tool
<
Take the tool from the database
<
ESC key – exit the tool database
”Tool database” soft keys
Delete tool
Take the tool from the ”ID number clipboard”
Delete the tool and place in the ”ID number clipboard”
Edit the tool parameters
Entries in the tool database - sorted by tool typep
Entries in the tool database - sorted by tool ID number
For further soft keys see ” 3.3.1 Setting Up a Tool List”