HEIDENHAIN CNC Pilot 4290 - Manual (Page 416)

9 Service and Diagnosis 404
9.2 Service Functions
9.2.3 Fixed-Word Lists
Materials and cutting materials
The terms for materials and cutting materials from
the technology database are contained in fixed-word
lists. Use them to adapt this database to your
requirements (see also ”
7.5 Cutting-Value Database”).
Fits
The parameter ”Fit” is included for the delta drill and
reamer tools. Specify the desired fit qualities in the
”0WZPASSU” fixed word list.
Note on editing fixed-word lists:
■ Maximal 64 entries
■ Code
■ Number from 0..63
■ Assign each code only once
■ Name
■ Maximum 16 characters
Editing a fixed-word list
Select ”Sys.srv. – FWL-editing – Language
independent.”
<
Select:
■ ”0TEMATER” (material)
■ ”0TESTOFF” (cutting material)
■ ”0WZPASSU” (fit quality)
<
Editing an entry
Select the position to be edited; press ENTER.
<
Edit the ”Code” or ”Term” and press OK. The CNC
PILOT saves the data.
New entry
Opens the ”Editing fixed-word lists” dialog
box.
<
Enter the ”Code”, ”Term” and press OK. The CNC
PILOT saves the data.