HEIDENHAIN CNC Pilot 4290 - Manual (Page 381)

HEIDENHAIN CNC PILOT 4290 369
7.5 Mac
hining P
a
ra
met
ers
Milling - Safety clearances and allowances
■ Safety clearance in infeed direction [SMZ] – Distance between
the starting position and the top edge of the workpiece to be milled.
■ Safety clearance in milling direction [SME] – Distance between
milling contour and cutter flank.
■ Allowance in milling direction [MEA]
■ Allowance in infeed direction [MZA]
11 – Load monitoring – General switches
■ Load monitoring ON/OFF
■ 0: No load-monitoring commands generated by TURN PLUS.
■ 1: TURN PLUS generates commands for load monitoring.
■ Position, components(corresponds to parameter Q in G996)
■ 0: Load monitoring not active.
■ 1: Rapid traverse paths are not monitored.
■ 2: Rapid traverse paths are monitored.
12..19 – Load monitoring for machining modes
The first parameter switches load monitoring on and off. The other
parameters define the components to be monitored with regard to
machining location/machining mode.
Entry for parameters 12..19:
■ ”Machining mode ...” on/off:
■ 0: Load monitoring off
■ 1: Load monitoring on
■ Component to be monitored (for more than one component, the
sum of the codes):
■ 0: No monitoring
■ 1: X axis
■ 2: Y axis
■ 4: Z axis
■ 8: Main spindle
■ 16: Driven tool
■ 32: Spindle 3
■ 64: Spindle 4
■ 128: C axis 1