HEIDENHAIN CNC Pilot 4290 - Manual (Page 50)

3 Manual Control and Automatic mode 38
3.4.5 Setting up Machine Dimensions
You can evaluate machine dimensions in the variable
programming of the NC program.
The ”Set machine dimensions” function accounts for
the dimensions 1..9 and the ”configured axes” for
each dimension.
Setting up machine dimensions
Select ”Setting up - Machine dimensions.”
<
Enter the machine dimension number
<
Enter the machine dimensions
Enter the values (”Set machine dimension x” dialog
box).
Capturing a single machine dimension
Select the input field
Move the axis to the desired position
Confirm the axis position as machine
dimension (or Y or Z position)
Capturing all machine dimensions
Move the slides to the desired positions
Confirm the axis positions of the slides
as machine dimensions
<
OK – enter the next machine dimension
Cancel – Exit the machine dimension setup
Machine dimensions are managed in machine
parameter 7.
Machine dimensions are given with
respect to the machine zero point.
Soft keys
■ Assigns a handwheel to an axis
■ Defines the handwheel interpolation factor
Switch the machine display
Enter the feed per revolution
Enter the constant surface speed
Enter the M function
Accept the axis position as machine dimension X (or Y or
Z axis)
Accept the axis positions of the slides as machine
dimensions
3.4 Setup Functions