HEIDENHAIN CNC Pilot 4290 - Manual (Page 412)

8 Operating Resources 400
”Cut.val.direct” menu item
Define the material, cutting material and machining
mode – the CNC PILOT opens a dialog box for editing
the cutting parameters.
Cutting Parameters
■ Specific cutting force for the material:
The parameter is for information only - it is not
evaluated.
■ Cutting speed
■ Main feed rate [mm/rev]:
Feed rate for primary machining direction
■ Auxiliary feed rate [mm/rev]:
Feed rate for secondary machining direction
■ Infeed (depth of cut)
■ With/without coolant
The automatic working plan generation (AWG) uses
this parameter to determine whether coolant is
used.
TURN PLUS multiplies the cutting
parameters by the correction factors (CSP/
FDR/DEEP comp.) assigned to the tools
(see ”
8.1.2 Tool Data Overview”).
8.3 T
e
c
hnolog
y D
atabase (Cut
ting
V
alues)