HEIDENHAIN CNC Pilot 4290 - Manual (Page 433)

HEIDENHAIN CNC PILOT 4290 421
■ During loading the CNC PILOT recognizes the parameter/
operating resource group from the file-name extension.
This is why the file name can be changed on external
systems – but not the extension.
■ During download the control checks whether the user is
authorized to edit this parameter, or whether the Automatic
operating mode is active. If the user is not authorized to
edit the parameter, the parameter is skipped.
1
0
.4 P
a
ra
met
ers and Oper
ating Resour
ces
Operation
■ Vertical arrow keys; Page Up/Dn: move the cursor
within the list of files.
■ Horizontal arrow keys: move from left to right
window and vice versa.
■ Enter (only in right window): displays the file
content – you close the file by pressing Enter again
(or Esc key)
Opens the selected parameter/
operating resource file and presents
the individual parameter/operating
resource file for marking and
subsequent transfer.
Converts and transfers the marked
parameter/operating resource file or
the marked parameters/operating
resources (selection) in the PARA_USR
directory.
Calls the marked parameter/operating
resource file from the PARA_USR
directory, converts the data to the
internal format and overwrites the
existing parameter/operating resource
data.
Marks all displayed files or parameter/
operating resources (selection) –
pressing again unmarks them
Marks the selected file or the
parameter/operating resource –
pressing again unmarks it
■ Mouse operation: You can use a mouse to position
the cursor, and mark and open a file (with DIN
PLUS programs, parameter files and operating
resource files).