HEIDENHAIN CNC Pilot 4290 - Manual (Page 238)

6 TURN PLUS 226
6.3.7 Help Functions for Element Definition
”Delete” drop-down menu
■ Delete ”Element/range”: deletes the contour elements last entered.
Select ”Element/range.”
TURN PLUS tags the last element.
Select the contour section by soft key and confirm. The contour
section is deleted.
■ Unsolved elements: deletes all insufficiently defined contour
elements immediately.
■ Section: deletes the entire contour.
”Zero point” drop-down menu
■ Displace: shifts the zero point of the coordinate system
■ to the position entered (absolute value)
■ by the value entered (incremental value)
■ Reset: Resets the zero point of the coordinate system to the
originally programmed position.
6
.3
W
o
rkpiece Descr
iption
Continued
”Duplicate” drop-down menu
■ Series – Linear: duplicates the selected contour section and adds it
n times to the contour.
Select ”Series (Row) - Linear.”
TURN PLUS tags the last element.
Select the contour section by soft key and confirm.
Enter ”Copy in linear series”
TURN PLUS extends the contour.
Parameter (”Copy in linear series”)
Q:
Number of copies (the contour section is copied Q times)