HEIDENHAIN CNC Pilot 4290 - Manual (Page 344)

6 TURN PLUS 332
6.1
7 Example
Undefined chamfers: 1x45°
Undefined radii: 1mm
Workpiece blank: ¬60 X 80; Material: Ck 45
6.17 Example
On the basis of the production drawing, the working
steps for defining the contour of the blank and
finished part, the setup procedures and automatic
working plan generation are explained.
Creating a program
Select ”Program - New.”
<
”New program” dialog box:
■ Enter a new program name
■ Material – select the material from the fixed-word
list
■ Press the ”program head” button
<
”Program head” dialog box:
■ Enter the spindle and slides for the 1st setup.
■ Fill in further input fields as required
<
Return to ”New program” dialog box
<
”OK” – the new program is ready
Defining a blank
Select ”Workpiece - Blank.”
<
Select ”Bar.”
<
”Bar” dialog box:
■ Diameter = 60 mm
■ Length = 80 mm
■ Oversize = 2 mm
■ ”OK” – TURN PLUS depicts the workpiece blank
<
To return to the main menu, press the ESC key.