HEIDENHAIN CNC Pilot 4290 - Manual (Page 392)

8 Operating Resources 380
8.1 T
ool
D
atabase
Example: Tool type 311
Parameters in dialog box 2 G S TP
TH DIN: Type of tool holder – • –
TH heig (wh): Height of tool holder – • –
TH brea. (wb): Width of tool holder – • –
Chck.. (fd): Diameter of chuck – *1 –
Chck.he. (fh): Height of chuck – *1 –
Sali.lg.(ax): Overhang length – • –
Pitch (hb): Thread pitch • – •
Fit qual(ity): See fixed-word list *2 – – •
Available.: Physical availability • – •
Pict. no. (tool display) – • –
Cut.mat. Cutting material – – •
CSP comp.: Correction factor for cutting speed – – •
FDR comp.: Compensation factor for feed rate – – •
Deep comp.: Compensation factor for cutting depth – – •
Location type • – •
Fixed-word list for fit quality:
■ H6
■ H7
■ H8
■ H9
■ H10
■ H11
■ H12
■ H13
*1 – Chuck dimensions
■ Holder types F, K: ”fd, fh” serve to indicate the holder dimensions
■ Other holders: Where fd=0 and fh=0, the chuck is not displayed.
*2: TURN PLUS's automatic tool selection checks whether the ”fit
quality” is defined. There is no detailed evaluation.
G: Basic data
S: Tool depiction (simulation)
TP: TURN PLUS
See also:
■ ” 8.1.4 Multiple Tools, Tool Life Monitoring” (parameters of the third
dialog box)
■ ” 8.1.5 Notes on Tool Data”
■ ” 8.1.6 Tool Holder, Mounting Position”