HEIDENHAIN CNC Pilot 4290 - Manual (Page 334)

6 TURN PLUS 322
6.15 Configuration
TURN PLUS
■ Adjusts the dimensions to the height and
width of the screen.
■ Increases the dimensions of the window
to show the complete workpiece.
X value input: With standard forms for
workpiece blank description, X values
always function as diameter values. X/XE
coordinates on contours for C/Y axis
machining always function as radius
values.
Window configuration (”Views” menu item):
Views that TURN PLUS is to depict besides the main view (XZ plane)
(front face, unrolled lateral surface, etc.).
Mirror main view ?
■ Yes: Complete contour is depicted
■ No: contour above the turning center is shown
Coordinates:
Setting of the coordinate system and the position of the workpiece
datum for the
■ Main view
■ Front face
■ Rear side
■ Lateral surface
Parameters (example of main view)
Delta X, Z: defines the dimensions of the control-graphic window
min XN, ZN: Defines the position of the tool zero point
6.15 Configuration
With the functions of the ”configuration” you change and manage
various display and input variants.
Settings:
Zoom behavior:
■ Dynamic: Adjusts the the contour depiction to the window
size
■ Static: Adjusts the contour depiction to the window size
when the contour is loaded and keeps this setting
Plane ID (designation of the coordinate axes)
■ Display
■ Do not display
Point grid (in background)
■ Display
■ Do not display
X value input (for basic elements and form elements of the turning
contour)
■ Diameter: Input is interpreted as diameter values
■ Radius: Input is interpreted as radius values
With help graphic (to illustrate the input parameters)
■ Yes: Display help graphics
■ No: Do not display help graphics