HEIDENHAIN CNC Pilot 4290 - Manual (Page 284)

6 TURN PLUS 272
Do not machine
The milling contour is not machined.
Delete milling attributes
Deletes all attributes of this milling contour.
Deburring
Deburrs the figure or the ”freely defined” open or closed contour.
Parameters
H:
Milling direction
■ 0: Up-cut mill
■ 1: Climb mill
B: Chamfer width
W: Chamfer angle: For tool selection – default 45°
K: Retraction plane: Cutter position before/after milling (lateral
surface: diameter).
6
.9
Assigning A
tt
ribut
es
Engraving
Engraves a contour (figure, ”freely defined” open or closed contours).
Parameters
B:
Width
W: Angle for the tool selection – default 45°
K: Retraction plane: Cutter position before/after milling (lateral
surface: diameter).