HEIDENHAIN CNC Pilot 4290 - Manual (Page 353)

HEIDENHAIN CNC PILOT 4290 341
7.2 Mac
hine P
a
ra
met
ers
7.2 Machine Parameters
Value ranges of machine parameters
■ 1..200: General machine configuration
■ 201..500: Slides 1 to 6: 50 positions per slide (NC
channel)
■ 501..800: Tool carriers 1 to 6: 50 positions per tool
carrier
■ 801..1000: Spindles 1 to 4: 50 positions per spindle
■ 1001..1100: C-axes 1 to 2: 50 positions per C-axis
■ 1101..2000: Axes 1 to 16: 50 positions per axis
■ 2001..2100: Various machine components
General machine parameters
6 – Tool measuring
These parameters define how to determine the tool
lengths in set-up mode.
■ Method (of tool measuring):
■ 0: Scratch
■ 1: Probe
■ 2: Optical measuring system
■ Measuring feed: Feed rate for approaching the touch probe
■ Clearance distance: Minimum distance, which has to be traversed in
the opposite direction to the measuring direction, to retract the touch
probe after the stylus has deflected.
7 – Machine dimensions
Within the framework of variable programming,
machine dimensions can be used in NC programs.
The contents and evaluation of machine dimensions
depend on the NC program only.
■ Dimension n X, Y, Z, U, V, W, A, B, C (n: 1 to 9)
17 – Display setting
The ”Display mode” defines the position display
(actual value display) within the machine display.
■ Actual-value display
■ 0: Actual value
■ 1: Lag error
■ 2: Distance to be covered
■ 3: Tool tip referenced to machine zero point
■ 4: Slide position
■ 5: Distance between reference cams and zero point
■ 6: Nominal position value
■ 7: Distance between tool tip and slide position
■ 8: IPO target position