Kawasaki D Series Controller MPVDCONTV113E-3 - Manual (Page 259)

D SERIES CONTROLLER
TROUBLESHOOTING AND COMPONENT REPLACEMENT
2-30
Ka a a w s k
2.10 REPLACEMENT PROCEDURE FOR FILTER
Wash filters periodically to keep them clean. For replacement, follow the replacement
procedure described below.
Filters are located on the side and back of the controller. Take the same procedure to replace
these filters.
1. In the center, bottom of the holder for the filter there is a notch. Insert something tube
shaped into the notch, and push up the filter. Be careful not to damage the controller face.
2. Pull up the raised filter.
3. Insert the replacement filter into the holder.
Side and back of the controller
Filter (on back)
Notch
Filter (on side)
Notch