1-4 data link data areas, Data link data areas, Tags – Omron SYSMAC CJ1W-EIP21 User Manual

Page 142: Tag sets

Advertising
background image

116

Overview of Tag Data Links

Section 6-1

System Configuration Conditions for Setting Tags Using Symbols or I/O Memory
Addresses

Local tags for tag data links can be set using I/O memory addresses or net-
work symbols. Support for network symbols, however, depends on the model
of CPU Unit, as shown in the following table.

Communications with the remote node are possible regardless of whether the
remote node tags are set using I/O memory addresses or network symbols.

Note

Symbols cannot be set for tags with CJ2H-CPU6

@

and CJ2M-CPU1

@

CPU

Units.

6-1-4

Data Link Data Areas

Tags

A data link between the local I/O memory and a remote I/O memory is called
a tag. A tag can be set using a network symbol name or an I/O memory
address.

Tag Sets

When a connection is established, from 1 to 8 tags (including PLC status) is
configured as a tag set. Each tag set represents the data that is linked for a
tag data link connection. Tag data links are thus created by connecting one
tag set to another tag set. A tag set name must be set for each tag set.

Note

A connection is used to exchange data as a unit within which data concur-
rency is maintained. Thus, data concurrency is maintained for all the data
exchanged for the tags in one data set.

Example

In the following example, input tags a to g at the originator are a tag set
named SP1_IN and output tags i and ii are a tag set named SP1_OUT). A
connection is set between these two tag sets.

Connection type

Each connection can be set for 1-to-1 (unicast) or 1-to-N (mul-
ticast) communications. (Default: Multicast)

Packet interval (RPI) 1 to 10,000 ms for CJ2M and 0.5 to 10,000 ms for other CPU

Units (in 0.5-ms units)

The packet interval can be set separately for each connection.

Item

Specification

Name in hardware list

of Network

Configurator

CPU Unit

EtherNet/IP Unit or

built-in EtherNet/IP port

Symbol name

specification

I/O memory

address

specification

CJ2B-EIP21

CJ2H-CPU6

@

-EIP

CJ2H-CPU

@@

-EIP

OK

OK

CJ2M-EIP21

CJ2M-CPU3

@

CJ2M-CPU3

@

OK

OK

CJ1W-EIP21(CJ2)

CJ2H-CPU6

@

-EIP

CJ2H-CPU6

@

CJ2M-CPU3

@

CJ2M-CPU1

@

CJ1W-EIP21

OK
(CJ2H-CPU6

@

-EIP and

CJ2M-CPU3

@

only)

(See note.)

OK

CJ1W-EIP21

CJ1 CPU Unit

CJ1W-EIP21

---

OK

CS1W-EIP21

CS1 CPU Unit

CS1W-EIP21

---

OK

Advertising
This manual is related to the following products: