Omron SYSMAC CJ1W-EIP21 - Manual (Page 172)

146
Setting Tag Data Links Section 6-2
Confirming the
Connections Settings
1,2,3... 1. An overview of the connections set in the Register Device List is displayed
in the Connections Tab Page.
2. Click the OK Button. The following kind of diagram will be displayed.
3. Repeat the Connections setting procedure until all of the connections have
been set.
Note After completing the settings, always click the OK Button before
closing the Edit Device Parameters Dialog Box and performing an-
other operation. If the Cancel Button is clicked and the dialog box
is closed, the new settings will be discarded.
Indicates the IP address of the
originator where the connection
was set.