Omron SYSMAC CJ1W-EIP21 - Manual (Page 200)

174
Setting Tag Data Links Section 6-2
Click the OK Button or the Close Button.
Verifying the Device
Parameters Use the following procedure to compare the device parameters for the devices
selected in the Network Configuration Window with those of the devices con-
nected on the EtherNet/IP network. The IP addresses, device types, and
device parameters are compared.
1,2,3... 1. Connect the Network Configurator to the network.
2. Click the icon of the EtherNet/IP Unit that is to be verified. To select multiple
nodes, hold down the Shift Key while clicking the icons. (In the following ex-
ample, the 192.168.250.1 and 192.168.250.2 nodes are selected.)
With the icons selected, right-click and select Parameter - Verify from the
pop-up menu.
3. The following dialog box will be displayed.
Click the Yes Button or the No Button.
4. One of the following dialog boxes will be displayed.
• Differences Not Found in the Comparison
• Differences Found in the Comparison