7 file transfer, File transfer – Leica Biosystems PELORIS_PELORIS II User Manual
Page 109
Settings & Ancillary Operations
Leica PELORIS™ User Manual Rev K © Leica Biosystems Melbourne Pty Ltd 2011
109
6.2.7 File Transfer
The file transfer functions (Control menu, File transfer) allow you to copy protocol, configuration,
current state, log and event summary files to and from 3.5" floppy disks or USB memory devices.
You can then use these files as a backup (especially useful for protocols) or to send to Leica
Microsystems or your service representative to aid system health diagnosis.
All user levels can transfer files.
Basic configuration for file transfer consists of three steps:
1. Set Peloris to use a USB key (or floppy disk) and attach the device to the instrument.
2. Configure which files to transfer.
3. Tap Transfer files to copy the files onto the remote device.
The File transfer screen is shown in Figure 59 with the areas used for the three steps shown.
Figure 59. File transfer screen
Refer to the following sections for detailed file transfer instructions:
Transferring Instrument Condition Files, Service Logs, and Event Details
Transferring Incident Report Files
Import/Export
protocols:
copy protocol files to
or from the remote
device
Run archive tasks now:
archive recent event and
service log files and delete
very old ones
Select event and
status files to transfer
Estimate size:
tap to see the size of the files
you have configured to
transfer at right of button
Incident report:
Select files related to a
specific event to transfer
Transfer files:
transfer selected files to
the remote device
Remote connection
type:
select the device type
to transfer files to
Refresh:
update the remote
connection information
shown below button
1
2
3