Leica Biosystems PELORIS_PELORIS II - Manual (Page 49)

Running Protocols
Leica PELORIS™ User Manual Rev K © Leica Biosystems Melbourne Pty Ltd 2011 49
3.3.2 Protocol Panels
Panels on each side of the Status screen show the steps of the protocols loaded for each retort.
Use the panels to load and unload protocols, initiate processing runs, and monitor protocol runs.
You can view the panels in two modes: standard and expanded (see images below).
Figure 29. Protocol panel: standard mode
In expanded mode the protocol notes, processing time, and step details are also shown.
Figure 30. Protocol panel: extended mode
Protocol name
Show details:
tap to expand protocol panel
Protocol finish time
Completed steps are checked
Progress through current step
Run/Pause: 
start a loaded protocol, or pause a
running protocol ( see 3.5 Pausing and
Abandoning Protocols)
Select/Unload protocol:
load and unload protocols (disabled while
protocol is running)
Protocol steps
The station scheduled for the step
(a different station may be used)
Processing time: 
total time to run protocol
Protocol notes
Step duration, temperature,
pressure/vacuum, and stirrer
speed