Leica Biosystems PELORIS_PELORIS II - Manual (Page 69)

Protocol Setup
Leica PELORIS™ User Manual Rev K © Leica Biosystems Melbourne Pty Ltd 2011 69
Station Reagent Selection
If the protocol uses station reagent selection you can see the stations configured for the
instrument. Bottles that are available for selection are drawn in 3D with lids and handles. Bottles
that are not available, because they have already been used or are incompatible, are drawn in 2D
without lids or handles. Wax stations are similarly drawn as 3D buttons (available) or 2D icons
(unavailable). Select specific stations for your protocol.
Figure 43. Reagent selection – Station dialog box
Deleting a Protocol
To delete a protocol select the protocol icon on the Protocol selection screen and tap Delete.
Pre-defined protocols can be restored if required, with the normal protocol creation procedure.
Other protocols cannot be retrieved unless you have copied them to an external device using the
file transfer functions (see 6.2.7 File Transfer).
This station is “hidden”
because it has already been
used for a previous step
Hide used: show stations
that have already been
selected as unavailable
These stations are unavailable because
they are not compatible with the
preceding protocol step
These stations are available
for selection
Show compatible: show
only compatible stations as
available
Show all: show incompatible
stations as available
The wax chambers are all unavailable
because they are not compatible with the
preceding protocol step