Leica Biosystems PELORIS_PELORIS II - Manual (Page 52)

Running Protocols
Leica PELORIS™ User Manual Rev K © Leica Biosystems Melbourne Pty Ltd 2011 52
Entering a New End Time or Default Scheduling Setting
Change the end time for a specific run in the Run protocol – edit end time dialog box, opened
from the Scheduling dialog box with the Edit end time button.
Also set the default scheduling setting for the current retort in the Run protocol – edit end time
dialog box.
Figure 32. The Run protocol – edit end time dialog box

To set a new end time for a protocol run use the keypad to enter the required end time of day
(24-hour format) or use the –15 or +15 buttons to increment the time in 15 minute steps.
Use the + Day and – Day buttons to change the day. Tap OK when finished.

To set a new retort scheduling default enter a time of day (as you would to change the end
time for an individual run) or tap ASAP. The day is not relevant to the default setting. Tap Set
as default then OK.
Keypad to enter time in top
field above.
Use 24 hour clock.
Scheduled time of day
Scheduled day
ASAP: 
Use if setting the “as soon as
possible” option as the retort
default
–/+15: 
change the scheduled time of
day in 15 minute increments
–/+ Day: 
change the scheduled day
Set as default: 
Set the time of day currently
entered or “as soon as
possible” setting as the retort
default